SEAREY -80
|
Searey Advanced Ultralight with C HULL Rotax 912 UL engine - 300 hrs TT New Ivo Medium 3 Blade Prop Icom Radio Intercom Pilot/Co-Pilot PTT on Ray Allen grips - 1 button and 5 buttons (Flaps and Trim) New ASI and Altimeter ELT Manual Gear Retraction Dual Brakes-New Brake Lines Electric Trim and Flaps Electric Fuel Pump Landing Lights and Nav/Strobe Lights All New Panel Wiring and Circuit Breakers This aircraft was ground looped and suffered a broken boom tube and prop strike. The engine was inspected by Rotax, and after measuring was cleared with a new slipper clutch and seals installed. The aircraft has a new BOOM TUBE - REFABRICATED Wings andControl Surfaces with polyfibre fabric and fresh paint. New Lexan Windxheild and Doors $47,500.00 call Fred Glasbergen: 604-596-7452 email: airflow@shaw.ca Will sell without engine for $39,500.00 or with new Rotax 912S with three blade Ivo Medium prop for a total price of $58,000.00
|
|
CHINOOK 2 Full Lotus Amphib
Floats
|
Chinook 2 Basic Ultralight HKS 4 stroke, 60hp Engine 50hrs total time since new Radio and Intercom Balistic Chute Full Lotus Amphib Floats REDUCED $29,000.00 Will sell without floats when it can be registered as an Advanced Ultralight (on wheels only) $23,000.00 Contact Fred Glasbergen 604-596-7452 or cel: 604-619-7452 email; airflow@shaw.ca |
![]() ![]() |
Air Force for
Sale
|
Lost medical….must sell… my loss is your gain…. (1) Menard BRX550….. C-IGBT….Tandem 2 Place, Rotax 532 64 Hp. Electric start, 42 hrs. TT on Airframe and Engine. Powerfin 3 blade propeller, 4130 ChromeMoly steel landing gear, Tundra tires, brakes (cable, front seat Pilot only), steer-able nose wheel, Dual 3-point restraint system, dual controls, Full VFR panel, streamlined struts, Stits wing and tail surfaces covering, Flaps, Rans S-7 wing-tanks, Like New seat-covers…………….…… Also includes… 1 Steel Frame T-Hangar (needs new plywood exterior, frame OK.) and 40 foot trailer behind hangar (Aluminum bodied trailer is a former road trailer and was moved to it’s current location on the wheels that it sits on) trailer contains wooden racks for material and a bench with vise included…. Can. $31,500.00 for the Package.
(2) Sylvaire Bushmaster I…..C-IDSP ….Single place, Rotax 503 SIDC 52 HP. Pull start, Less than 150 Hrs on Airframe….60 Hrs. on new crank in engine, IVO 3-Blade Propeller with IVO Quick ground adjustable Hub, Full VFR Panel, Long range external tanks, Tundra tires. Aluminum Hubs with Hydraulic non-differential brakes, steer-able tail-wheel, Three-point Harness and Sheepskin seat cover, Can. $17,000.00 for the Package.
(3) Eipper MX II…C-IFDZ….Two place, Cuyuna 430 Engine, 35 Hp. 15 Hrs. on Airframe and rigging cables since complete rebuild, 45 Hrs. on engine, Wood 2 blade propeller, Full 3-point restraint for both seats, pull start, Hall’s Air speed indicator, very basic two axis flying…… Extras include: long range seat mounted tank, Wheel pants, Complete drive train for Rotax 503 (non-provision) including propeller, bearings, shaft, multi-belt sheaves and engine-mount plates. NEEDS SAILS. Can. $4.500.00 for the Package.
|
(4) Spares…Rotax 447 42 Hp. with manual, Rotax 508 40 Hp. (this is a 4 stroke version of the 503) with manual, 3 sets of 503 non-provision cases and crank-shafts, Asstd. 503 Heads, Cylinders,Pistons, Electrics, pull-starts, electric starter with mounting hardware for 503, Asstd "A" and "B" gear-box cases and parts, ………. 5 wooden propellers, all in good usable condition including 1 NEW prop, many NEW Rotax engine parts (NEW Gasket sets for 503, 532, pistons/rings, wristpins/bearings, lots of Bing carb parts, jets, needles, Etc.ALL NEW) Rotax Mufflers (Some NEW)…ROTAX SHOP TOOLS….original Rotax tools to do overhauls and top-end work on all 2 stroke Rotax engines (tools like new) ………… Can. $9,500.00 for the Package. If you Buy the Whole Air-Force (1,2,3,) I’ll reduce the spares package (4) price to Can. $4,500.00 I will NOT break up packages, please do not ask. Serious Buyers only, ….please call: Jack Menard: Phone 604-531-9526 E-mail: jpmenard@shaw.ca |
|
|